Usage; Technical Data - Resol VBus Manuel

Information about the product
Proper usage
The VBus -Repeater may only be used for the connection
®
between RESOL products equipped with a VBus
RESOL controller in compliance with the technical data
specified in these instructions. Improper use excludes all
liability claims.
CE-Declaration of conformity
The product complies with the relevant directives
and is therefore labelled with the CE mark. The
Declaration of Conformity is available upon re-
quest, please contact RESOL.
Disposal
• Dispose of the packaging in an environmentally sound
manner.
• Dispose of old appliances in an environmentally sound
manner. Upon request we will take back your old appli-
ances bought from us and guarantee an environmentally
sound disposal of the devices.
8

Usage

The VBus -Repeater is a signal amplifier. By connecting to
®
the VBus interface of a RESOL controller, a current of
®
200 mA in total can be supplied to modules such as the
® and a
SD3, SDFK, VBus
necting several modules to one controller at once is possi-
ble. The distance between the controller and the module(s)
can be up to 150 m.
Note
The VBus
dules that receive information from the controller.
Modules that transmit information to the controller
cannot be connected.

Technical data

Housing: plastic
Protection class: IP20 / EN 60529
Dimensions: 95 x 70 x 25 mm
Input: 1 RESOL VBus
Outputs: 3 RESOL VBus
200 mA in total)
Power supply:
Input voltage of mains adapter: 100 ... 240 V~ (50-60 Hz)
Input voltage of repeater: 12 V / 1 A 5.5 × 2.1 mm
/ PWM, GA3, EM-HP or
®
-Repeater can only be connected to mo-
®
master (controller)
®
devices (modules, e.g. AM1, SD3,
®
AM1. Thus, con-