Usage; Technical Data - Resol VBus-Repeater Manuel

Information about the product
Proper usage
The VBus Repeater may only be used for the connection
®
between RESOL products equipped with a VBus
RESOL controller in compliance with the technical data
specified in these instructions.
liability claims.
CE-Declaration of conformity
The product complies with the relevant directives
and is therefore labelled with the CE mark. The
Declaration of Conformity is available upon re-
quest, please contact RESOL.
Disposal
• Dispose of the packaging in an environmentally sound
manner.
• Dispose of old appliances in an environmentally sound
manner. Upon request we will take back your old ap-
pliances bought from us and guarantee an environmen-
tally sound disposal of the devices.
8
and a
®
Improper use excludes all

Usage

By connecting the VBus Repeater to the VBus
®
of a RESOL controller, a current of 200 mA in total can be
supplied to modules such as the SD3, AM1, or EM. Thus,
connecting several modules to one controller at once
is possible. The distance between the controller and the
module(s) can be up to 150 m.

Technical data

Housing: plastic
Protection class: IP20 / EN 60529
Dimensions: 95 x 70 x 25 mm
Input: 1 RESOL VBus master (controller)
®
Outputs: 3 RESOL VBus
EM, SD3, 200 mA in total)
Power supply:
Input voltage of mains adapter:
100 ... 240 V~ (50-60 Hz)
Input voltage of repeater:
12 V / 0,5 A 5.5 × 2.5 mm
interface
®
devices (modules, e.g. AM1,
®