Chauvet Professional COLORdash Batten-Quad 12 Guide De Référence Rapide page 3

COLORdash Batten-Quad 12 QRG
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The COLORdash Batten-Quad 12 will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
The COLORdash Batten-Quad 12 uses a regular DMX data connection for its
DMX personalities: 4 Ch, 6 Ch, 10 Ch, 48 Ch, and 52 Ch. See the User
Manual to connect and configure for DMX operation.
The COLORdash Batten-Quad 12 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Before mounting this product, read the
clamp is capable of supporting the weight of the product. For our Chauvet line
of mounting clamps, go to
clamps/.
Safety
Cable
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
Safety
trusst.com/productcategory/base-plates-accessories-
3
Screw Color
Brown Yellow/Brass
Blue
Notes. Make sure the mounting
Mounting
Clamp
Overhead Mounting
Floor Mounting
Function
EN
Silver
Green