Philips HQ6894 Mode D'emploi page 7

2
C
1
C
2
1
C
C
1
2
Replacing the shaving heads
Replace the shaving heads every two years for
optimal shaving results.
1 Switch the shaver off, remove the
powerplug from the socket and pull the
appliance plug out of the shaver.
2 Press the release button to open the
shaving unit.
3 Turn the wheel anti-clockwise and remove
the retaining frame.
4 Remove the shaving heads and place the
new ones in the shaving unit in such a way
that the parts with the small holes point
towards the centre of the shaving unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
5 Reassemble the shaving unit by replacing
the retaining frame. Press the wheel and
turn it clockwise.
If the shaving heads have been properly inserted,
a shiny circle is visible on top of the shaving unit.
Replace damaged or worn shaving heads with
Philishave HQ6 Quadra Action shaving heads
only.
ENGLISH
9