Switching On And Setting Temperatures - Bosch KGU Serie Notice D'utilisation

en
Getting to know your appliance
7 "alarm" display
This illuminates only if the alarm
function is activated. This occurs if it is
too warm in the freezer compartment,
endangering the frozen-food. It goes out
when the operating temperature of the
freezer compartment is reached again.
8 "super" display
This illuminates if the "super" button 3
is pressed and thus fast-freezing is
switched on.
It goes out again if the "super" button is
pressed again to switch it off.
It goes out automatically at the earliest,
52 hours after switching fast-freezing on.
9 Multi-function display
Displays various temperatures.
a) Freezer-compartment temperature too
warm
If display 9 flashes, the freezer
compartment is or was too warm due to
a power failure or a fault in the freezer
compartment. If the Alarm button is
pressed on display 9 (not flashing), the
warmest temperature which was reached
in the freezer compartment is displayed
for five seconds. Then this value is
deleted. The programmed freezer-
compartment temperature is then
indicated on display 9 without flashing.
24
b) "Al" (Alarm) display
Is displayed if the freezer compartment is
too warm.
c) Set temperature for refrigerator
compartment
If the "Cooler" button is pressed, the set
temperature for the refrigerator
compartment is displayed.
d) Set temperature for freezer
compartment
If the "Freezer" button is pressed, the set
temperature for the freezer compartment
is displayed.

Switching ON and setting temperatures

2
Fig.
Put the plug in the socket.
l
Press appliance main switch 1.
l
Warning signal is emitted, display 9
flashes and "AL" is indicated.
l Press "alarm " button 2.
Warning signal stops. The current
temperature is now displayed for 5 sec.
"AL" is indicated on display 9.
Set the temperature for the freezer
l
compartment.
To do this, press first the "freezer"
button and then press the 0 C button.
Press the 0 C button repeatedly or press
and hold until the desired temperature is
displayed (continuous sequence, after
–26 0 C, –16 0 C appears again).We
recommend setting the temperature of
the freezer compartment at –20 0 C.
Set the temperature for the refrigerator
l
compartment.
To do this, press first the "cooler" button
5 and then press the 0 C button. Press the
0 C button repeatedly or press and hold
until the desired temperature is displayed
(continuous sequence, after 8 0 C, 2 0 C
appears again). We recommend setting
the temperature of the refrigerator
compartment at +4 0 C.
The temperature setting can also only be
corrected slowly.
en
Note
The temperature in the refrigerator
l
compartment may fluctuate because:
– The appliance door is opened frequently
– Large quantities of fresh food are placed
in the refrigerator compartment and/or
freezer compartment
– The ambient temperature changes
– The temperature-selector setting for the
freezer compartment changes or
"super" freeze has been activated.
To prevent condensation in the area of
l
the door seal, the sides of the housing
are partially heated.
25