Cleaning The Interior - Gastro 70/40 PVE Serie Installation-Emploi-Entretien

GLASS CERAMIC HOB
In the event the glass ceramic hob is broken,
contact our company to have it replaced.
SOLID TOP RANGE HOB
REPLACING THE RADIANT HOTPLATES
- Remove the control panel.
- Remove the tray by tilting it downwards and
pulling it out.
- Replace the faulty component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE THERMOSTAT
- Remove the control panel.
- Remove the tray by tilting it downwards and
pulling it out.
- Remove the bulb from its seat and replace the
faulty part.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE FAN AND THERMAL FUSE
- Remove the control panel.
- Remove the fan lid.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
ELECTRIC OVEN
REPLACING THE KNOB AND INDICATOR LIGHT
- Remove the control panel.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE WORKING THERMOSTAT AND
SAFETY THERMOSTAT
- Remove the control panel.
- Remove the bulb from its seat on the side of the
oven.
- Remove and replace the component.
- Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE HEATING ELEMENT
- Remove the oven floor (only for lower heating
elements).
- Undo the screw securing the element to the oven
and pull the element out by approx. 10 cm.
- Reassemble all parts. For assembly, proceed in
reverse order.
CONVECTION OVEN
REPLACING THE KNOB AND INDICATOR LIGHT
Remove the control panel.
Remove and replace the component.
Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE WORKING THERMOSTAT AND
SAFETY THERMOSTAT
Remove the control panel.
Remove the bulb from its seat on the side of the
oven.
Remove and replace the component.
Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE HEATING ELEMENT
Remove the oven floor (only for lower heating
elements).
Undo the screw securing the element to the oven
and pull the element out by approx. 10 cm.
Reassemble all parts. For assembly, proceed in
reverse order.
REPLACING THE MOTOR
Remove the oven floor.
Remove the interior panel
Remove the engine support.
Remove and replace the component.
Reassemble all parts. For assembly, proceed in
reverse order.

21. CLEANING THE INTERIOR

26