Worx WX15RT Traduction Des Instructions Initiales page 7

TECHNICAL DATA
Rated voltage
Rated power
Rated no load speed
Collet size
Double insulation
Machine weight
NOISE AND VIBRATION DATA
A weighted sound pressure
A weighted sound power
K &K
PA WA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials are cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appro-
priate).
Router
WX15RT WX15RT.2
1500W
WX15RT.1 WX16RT
230V~50Hz
11500~28000/min
Ø8 &12mm
4.3kg
Vibration emission value < 2.5m/s
WX16RT.1
1800W
86dB(A)
97dB(A)
3.0dB(A)
80dB(A)
2
EN
7 7