Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
How to Make Cocktails
1. Place a cocktail glass on Bar Mat. Lift Lid Handle and
insert a Cocktail Capsule in Capsule Holder with tab
facing front center position.
2. Lower Handle and press firmly until latch clicks into
place.
NOTE: Once Capsule is punctured, the drink must
be made. The contents of the Capsule will drain if
removed from Holder before finishing drink.
3. Barcode Reader will recognize cocktail. Display will
indicate what type of glass to place under Dispenser,
and if ice is recommended. Drinks may also be
dispensed into a Shaker. After placing the appropriate
glass, touch "Next" on Control Panel.
IMPORTANT: If Main Menu is displayed after
puncturing capsule, open Lid and wipe top of Capsule
and Barcode Reader with a soft, damp cloth and close
Lid.
NOTE: If rum or gin are needed for the cocktail,
machine will ask to confirm correct spirit is in Spirit
Bottle Holder.
4. Control Panel will show choices of strength: Mocktail,
Light, Regular, or Strong. Refer to Cocktail Capsule
Packaging to understand strength for each cocktail.
Press desired strength and then press "Mix" on Control
Panel.
5. Cocktail Machine will dispense appropriate spirit,
contents of Capsule, and water. Control Panel will show
a bar that tracks progress. Bubbles will appear in Spirit
Bottle as spirit is being dispensed.
6. Once drink is complete, lift Lid Handle to remove
Cocktail Capsule and dispose of recyclable container.
Cocktail Machine is ready for next drink.
NOTE: When finished making cocktails, remove Water
Reservoir and discard water. Replace Reservoir on Base
and add water before next use.
|
8
Bartesian Customer Care 1.833.501.6889
Place a Highball Glass
With Ice
Under the Dispenser
Next
Spirit Strength
Mocktail
Light
Regular
Strong
Mix
Publicité
