Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
Important Instructions for First Use
Remove Cocktail Machine and components from box and place on a flat, sturdy surface.
Wash all removable parts following "Care and Cleaning" instructions.
The Bartesian Cocktail Machine features a Removable Water Reservoir with Lid. Since
the mixers in the Cocktail Capsules are concentrated, all drinks are mixed with water to
deliver the optimal flavor. Before using the Cocktail Machine, the water line needs to be
primed. Follow these instructions in order to prime the system for first use.
1. Fill Water Reservoir with water only. Do not fill with mixes, juices, club soda or
other liquid. Cocktail Machine will stop working and void warranty if other liquids
are used.
NOTE: Because water quality varies, use bottled or filtered water for the best-
tasting premium cocktails.
2. Place Water Reservoir in Base.
3. Fill each Spirit Bottle with spirits as indicated on Dispenser
Lids. Screw Lids securely in place.
4. Tip Spirit Bottles upside down and insert into Spirit Bottle
Holders on Base. Spirit Bottles will snap into place. To
remove, slightly tip Spirit Bottle and slowly pull up.
NOTE: Gin and rum share the same Holder. The Cocktail
Machine will prompt you to switch bottles if necessary
for your cocktail. It is very important to put the Spirit
Bottles in the correct Spirit Bottle Holder. If in the wrong
position, the finished cocktail will be incorrectly mixed.
5. Insert Removable Power Cord end into Power Cord Port in back of Base.
6. Plug into outlet. Touch the Control Panel to wake up the Cocktail Machine.
7. Touch Settings Menu (
8. Place an 8-ounce (237 ml) container under Dispenser.
9. Select "First Use" and follow prompts to prime water line.
NOTE: All four Spirit Bottles do not need to be filled and installed for Cocktail
Machine to operate, only Spirit Bottle(s) listed on label of Cocktail Capsule in use.
) on Control Panel.
|
bartesian.com
7
Publicité
