Publicité
Les langues disponibles
Les langues disponibles
MONTAGE
- Slide the lower tube (6) into the upper tube (5) and lock the lower
tube with the screw on the top tube.
- Slide the top tube into the motor housing (11) and fasten with two
screws.
- Slide the opening of the collection bag over the collection bag
connection (7) and hook the bag on the lower tube (6).
- Hook the carrying strap to the attachment point (10).
The carrying strap should be wrapped around the shoulder worn
during use to ensure a good balance sheet.
- Slide the wheel guide set over both tubes and fix with the screw.
Instructions for use
- Connect the device to a suitable extension cord.
- Hold the appliance with both hands and with fasten the carrying
strap around the shoulder.
- Move the device slowly back and forth.
- Keep the wheels on the ground during use to reduce the workload.
- The collection bag can be emptied by the zip in the bottom and
open the empty the bag.
Selecting the function
The appliance is intended for use on the desired function (blow or
suck) to be set.
- For blowing, turn the switch (2) to the bladder symbol.
- For suction, turn the switch to the suction symbol.
Switching on and off
- To turn on the device, press on/off switch (1).
- To switch off the appliance, leave the on/off switch (1) loose.
CLEANING AND MAINTENANCE
The device does not require any special maintenance.
- Clean the ventilation openings regularly.
- Regularly remove leaves and debris from the
Pipe, casing and drain opening.
Before performing any maintenance on the machine
always performs the plug first from the wall socket.
12
Publicité
