Warranty Exclusions; General Warranty Conditions - Interchange NSJH38-34 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Limited Five (5) Year Warranty for Pneumatic Nailers

Our products are designed and constructed using the highest standards of both material and workmanship.

We warrant to the original retail purchaser that their nailers will be free from defects in material or workman-

ship for the warranty period of five years.

During the warranty period (which begins on the purchase date), we will repair or replace, at our option

and expense, any product or part that is defective in materials or workmanship after examination by an

Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below.

Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the

replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL

PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. To make a warranty claim, you must return the

product, with proper receipt/proof of purchase and return transportation charges prepaid, to us (your dealer)

or an Authorized Warranty Service Center. We will perform our obligations under this warranty within a rea-

sonable time after approval of the warranty claim.

The following warranty exclusions apply:

1. Normal wear parts are not covered under this warranty. Normal wear parts include, for example, rubber

o-rings, seals and driver blades.

2. This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, opera-

tion at other than recommended speeds, improper storage, or damage resulting during shipping.

3. Products used in production/industrial applications are excluded from this warranty.

4. Labor charges, maintenance, or loss, damage and repairs resulting from improper operation are not covered

by this warranty.

This warranty will be honored, only if:

1. Clean, dry, regulated compressed air has been used at air pressure not exceeding the maximum indicated on

the tool casting;

2. No evidence of abuse, abnormal conditions, accident, neglect, misuse or improper modifications or storage

of the product exists; and

3. No deviations from following recommended operating instructions, specifications, and maintenance sched-

ules exist. (Read Operator Manual for use, specifications, and maintenance instructions).

This warranty is the only warranty for the product and we disclaim all other warranties. Any implied war-

ranties will be limited in duration to the applicable warranty period specified above. Some states do not allow

limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Your rem-

edies are solely and exclusively as stated above. We shall in no event be liable for incidental, consequential,

indirect or special damages. Some states do not allow the exclusion or limitation of incidental or consequen-

tial damages, so the above limitation or exclusion may not apply to you. In no event, whether as a result of

a breach of contract, warranty, tort (including negligence) or otherwise, shall our liability exceed the price

of the product that has given rise to the claim or liability. Any liability connected with the use of this product

shall terminate upon the expiration of the warranty period specified above. No employee or representative of

any distributor or dealer is authorized to make any change or modification to this warranty.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to

state.

Interchange Brands

Operator's Manual

Models: NSJH38-34 / NSJH64-34

(03-08-17)