Mode Of Function; Service / Maintenance; Disturbances / Repairs - Bola G 870-01 Mode D'emploi

BOLA Cordless Pumps for Acids and Caustig Solutions
» Introduce the suction pipe (5) into the liquid that has to be
pumped. The end outlet pipe (3) has to be put into a collecting
vessel (6).
» Start to pump by pressing the "ON-button" (7). Once the "
ON-button" is released, pumping is stopped immediately.

4. Mode of Function

The pump is actuated by two standard batteries (accumulators) type Mono 1.5 V. The rotation of the pump shaft is
transmitted by an encapsulated magnetic coupling to the pump impeller. This magnetic coupling protects at the same
time the electronic components from being damaged by the pumped products.

5. Service / Maintenance

» Rinse the pump with clear water after use.
» Take off the accumulators if the pump is not used for a longer period of time.
» Store the pump in suspended state.

6. Disturbances / Repairs

The following information shall help you to recognise and, if possible, to eliminate possible reasons for disturbances
by yourself. If you are not able to handle the disturbance, please give us a call. We will then try to help you this way. If
then, a solution to your problem cannot be found, we will ask you to return the cleaned pump in the original packing to
us. Then we will check whether a cost-effective repair is possible.
7
3
5
6
7