Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BOLA
Cordless Pumps for Acids and Caustig Solutions
1. Supplied with
1 BOLA Cordless Pumps for Acids and Caustic Solutions, optionally with suction pipe length 400 or 600 mm
1 Outlet Pipe
1 Operating Instructions
2. Security Advice
»
Do not take a damaged pump into operation.
»
The pump is suitable only for watery products without any solids.
»
Do not used the pump in explosive areas.
»
Do not pump products which charge electrostatically.
»
Do not use the pump without mounted outlet pipe.
»
After pumping, residues inside the pump can run out even if the pump is switched off.
»
The "OFF-switch" does not have any function. Upon letting the "ON-switch" off, the pump switches off.
3. Taking into operation
»
Remove the red battery housing (1) from the pump housing (2) by
turning it counterclockwise.
»
Fit two loaded batteries type Mono 1.5 V in the battery housing (1).
The positive poles have to be in direction of the opening of the
battery housing.
»
Screw the battery housing (1) on the pump housing (2) by turning it
clockwise.
»
Mount the outlet pipe (3) by screwing the connecting nut (4) to the
suction pipe (5).
1
2
1
1
2
3
4
5
6
Publicité
Chapitres
Table des Matières
