Publicité
Les langues disponibles
Les langues disponibles
In the packaging.
Remove the machine and parts from the packaging and check that
the following parts are included:
- Reaper mower
- Lever (bottom).
- Lever (top).
- 2x lever connections.
- 6x bolts.
- 6x nuts.
- Instructions for use.
Installation.
Fix the underside of the handle in the reel mower. Attach the top of
the handle to the underside using the connections.
Set the cutting height.
Adjust the cutting height by turning both levers in the indicated
direction. These are located on the side of the reel mower. When
the correct height has been set, tighten the knobs again. (See figure
C on page 2)
Using the lawnmower.
For best results, start at the side of a lawn and mow in straight
lines. At the end of each lane, turn the lawnmower over and mow in
the opposite direction with a small overlap over the previous lane.
(See figure E on page 2)
Maintenance.
To ensure long and reliable use of the lawnmower, you should carry
out the following maintenance on a regular basis:
- Before each use, check for defective parts or loose bolts, nuts or
knives. Replace if necessary.
- Before every use, check that the protective covers are in place
and functioning.
- Check regularly that the machine is safe to use.
Publicité
