Overload Protection; Practical Tips; Instructions For Use - Carat SL-1506 Manuel D'utilisation

For horizontal cuts; pull the machine through the material
from left to right.
For vertical cuts; let the machine grind itself through the
material from top to bottom.

OVERLOAD PROTECTION

To protect the motor, the machine is provided with a LED
load indication and a electronic overload protection sy-
stem. Whenever the engine is switched off due to over-
load, it must be switched on again as soon as possible to
cool the motor. Then let the machine run for a minimum of
1 minute without load.
The LED indicates the load on the motor:
Continuously green Normal load
Blinking red Overload
Continuously red Overload; the motor will switch off
automatically

PRACTICAL TIPS

• Do not use diamond grinding wheels which are ec-
centric. These cause extra burden to the bearings
and cogs.
• Avoid overloading.
• Only switch on the handheld powertool when the dia-
mond grinding wheel can rotate freely.
• By fastening a slat to the wall, to guide the handheld
powertool, improves the making of straight cuts.
It isn't possible to cut curves!
MAINTENANCE
Generally it can be put that regular main-
tenance (checking, cleaning, oiling) has a
positive eff ect on the safety for the operator
and the lifetime of the handheld powertool.
It is recommended to have the handheld powertool chec-
ked by a certifi ed expert after 300 hours
Only use original spare parts.
WARRENTY
For this product is a warranty period of 12 months appli-
cable from the date of delivery. Guarantee claims has to
be proved by showing the purchase invoice. Guarantee
claims have to be proved by showing the purchase invoice.
The guarantee includes the repair of defects which have
occurred and can be linked by to material or manufactu-
ring faults. Transport costs for the equipment from and to
the client are to be paid by the client. Travel- and housing
costs for repair personnel on site are to be paid by the
client.
Not covered by guarantee defects caused:
- by incorrect use or connection.
- machine overload.
- incorrect or bad maintenance.
- not properly following the information from the manual.
- the machine is used by unqualifi ed personel.
- if the machine is used for purposes not suitable.
- the machine is repaired using unoriginal parts.
- if the machine encryption is damaged or deleted.
- if defects are caused by fi re, damp and/or transport.
8
ENGLISH – ORIGINAL INSTRUCTIONS
SYMBOLS
Do not dispose of electric tools toge-
ther with household waste material!
This product is in accordance with
applicable EC directives.
Wear hearing protection; when sound
levels are over 90dB(A), hearing
protection is obligatory.
Use a dust mask with fi ltering class
FFP2.
Wear suitable protective working
gloves.
Always disconnect the plug from the
socket before carrying out any work
on the machine!
Read the operating- and safety
instructions before use.
CAUTION
NMHX030
16-08-2018