Quick QCC-LCS TP TS 4.3'' Mode D'installation Et D'emploi page 18

CONFIGURATION
EN
INITIAL SETTINGS
START
1) Switch on the product and press START on
the touch panel.
QUICK COLOR CONTROL SYSTEM
Wizard
4) Press "Wizard"
CONFIGURATION WIZARD
Room Setting
Create new room
F
NOTE
: if the system provides for more QCC-LCS TS, where at least one of them has already been configured,
the QCC-LCS TS recognizes any configured environments and proposes the creation of a new environment or the
duplication of an existing environment.
Room setting
Create new room
Copy an existing room setting
Select the language
2) Press on the chosen language.
3) Confirm by pressing "OK".
1.0 Environment creation
Select "Create new room".
By selecting "Copy an existing room setting", it is possible to
access a list of environments created and configured, from which
to select the environment to be duplicated.
The QCC-LCS TS automatically configures itself to be used in the
environment with the digital buttons already associated to zones.
18
QCC-LCS TS - REV001A
OK
QUICK SPA