Trouble Shooting; Protect Our Environment; Warranty - Dexter 12VSD2-21.5A Mentions Légales & Consignes De Sécurité

FR

11. TROUBLE SHOOTING

Problem
ES
The machine stops working
after rotating slowly.
PT The drill bit or screwdriver
bit easy to fall o
IT
Abnormal sound of
gearbox.
EL

12. PROTECT OUR ENVIRONMENT

PL
Attention! Always remove the battery before carrying out any work on the machine.
To clean, always use a dry or moist, but not wet, towel. Many cleaning agents contain chemical
substances which may cause damage to the Plastic parts of the machine. Therefore do not use any
UA
strong or
agents. Always keep air ventilation holes free of dust deposits to prevent overheating.
RO
EN
Transport conditions
Transportation of products can be any kind of closed transport in the packaging of the manufacturer or without it, preserving the product
from mechanical damage, precipitation, exposure to chemically active substances and compliance with precautionary measures for the
transport of fragile goods.

13. WARRANTY

1. Dexter products are designed to highest DIY quality standards.Dexter
warranty applies to all material and manufacturing defects which may arise. No further claims are possible, of whatever nature, direct or indirect,
relating to people and/or materials.
2. In the event of a problem or defect, you should rst always consult your Dexter dealer. In most cases, the Dexter dealer will be able to solve the
problem or correct the defect.
3. Repairs or the replacement of parts will not extend the original warranty period.
4. Defects which have arisen as a result o mproper use or wear are not co vered by the warranty. Amongst other things, this relates to switches,
protective circuit switches and motors, in the event of wear.
5. Your claim upon the warranty can only be processed if:
• Proof of the purchase date can be provided in the form of a receipt
• No repairs and/or replacements have been carried out by third parties
• The tool has not been subjected to improper use (overloading of the machine or
• There is no damage caused by external
• There is no damage caused by non-observance of the safety instructions and the instructions for use.
6. The warranty stipulations apply in combination with our terms of sale and delivery.
7. Faulty tools to be returned to Dexter via your Dexter dealer will be collected by Dexter as long as the product is properly packaged. If faulty
goods are sent directly to Dexter by the consumer, Dexter will only be able to process these goods if the consumer pays the shipping costs.
8. Products which are delivered in a poorly packaged condition will not be accepted by Dexter .
Possible Causes
The battery is in low power.
The drill bit or screwdriver bit is not tightly
clamped with the chuck
The speed selector is not in place
mmable cleaners such as petrol, paint thinner, turpentine or similar cleaning
CAUTION! This product has been marked with a symbol relating to removing electric and electronic waste. This means that this
product shall not be discarded with household waste but that it shall be returned to a collection system which conforms to the
European WEEE Directive. Contact your local authorities or stocks for advice on recycling. It will then be recycled or dismantled in order
to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human
health since they contain hazardous substances.
CAUTION! Do not dispose of batteries in your normal household waste!
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. According to the European Battery Directive, defective
or used battery packs/batteries, must be collected separately and disposed o n an environmentally correct manner. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice. It will then be recycled or dismantled in order to
reduce the impact on the environment. Battery pack/batteries can be hazardous for the environment and for human health since
they contain hazardous substances.
ences or foreign bodies such as sand or stones.
Likely solutions
Need to charge the battery pack before operating.
Put the drill bit or screwdriver bit into the middle of
the three jaws of the chuck, re-tighten and visually
check the drill bit or the screwdriver bit without
tilting.
you need to push the speed selector in place (before
or behind).
r a 36-month warranty for its machine from the date of purchase. This
ng non-approved accessories).
11