Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Stainless steel surfaces : to maintain your grill's high quality appearance, wash with mild detergent and
warm soapy water and wipe dry with a soft nonabrasive cloth after each use. Backed-on grease deposits
may require the use of an abrasive plastic cleaning pad.
INSECTS.
FACT: sometimes spiders and other insects climb into
the grill tubes attached to the burners. The spiders spin webs,
build nests and lay eggs. The webs or nests can be very small,
but they are very strong and can block the flow of gas. Clean burners prior to use after
storing, at the beginning of grilling season or after a period of one month not being used.
Spider guards are on the air intakes in an effort to reduce this problem, but it will not
eliminate it! An obstruction can result in a "flashback" (a fire in the burner tubes). The grill
may still light, but the obstruction does not allow full gas flow to the burners.
CLEANING THE BURNER ASSEMBLY
Follow these instructions to clean and / or replace parts of burner assembly or if you have trouble
igniting grill.
1. Turn gas off at control knobs and LP Tank.
2. Remove cooking grates, grease tray and grease cup.
3. Remove screw at end of burner using a screwdriver.
4. Carefully lift each burner up and away from valve openings.
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new
burner. Reinstall the burner, check to ensure that the Gas valve orifices are correctly positioned and
secured inside the burner inlet
56
Publicité
Table des Matières
