To Check For Leaks - GREADEN GR-3B31NA Mode D'emploi

TO CHECK FOR LEAKS

Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3 parts water.
Ensure the control valve is "OFF".
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections are secure
then turn ON the gas.
Brush the soapy solution on to the hose and all joints. If bubbles appear you have a leak, which must be
rectified before use.
Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
If leakage is detected and cannot be rectified, DO not attempt to cure leakage but consult your gas dealer.
LIGHTING YOUR BARBECUE
This barbecue is designed for use outdoors, away from any flammable materials. It is important that there
are no overhead obstructions and that there is a minimum distance of 1 m from the side or rear of the
appliance. It is important that the ventilation openings of the appliance are not obstructed. The barbecue
must be used on a level, stable, non-flammable surface. The appliance should be protected from direct
draughts and shall be positioned or protected against direct penetration by any trickling water (e.g. rain).
Parts sealed by the manufacturer or his agent must not be altered by the user. No modifications should be
made to any part of this barbecue and repairs and maintenance should only be carried out by a registered
service engineer.
52