Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
BUILT–IN CONSTRUCTION DETAILS
Access Drawers
Cutout dimensions
NOTE: The cutout of each corner should be 90
drawers to fit properly.
* Island installation to use minimum of 3 vents, 10 square inches per vent (typical).
** For proper support and drawer operation, insure that support boards are
installed per Installation Guide instructions.
MODEL NUMBER
(+0,-1/8)
ADR148
ADR136
ADR130
ADR124
To order access drawers or doors, please call DCS Customer Care at 1.888.936.7872 for DCS Dealer in your area.
FIG. 06
º
angle in order for the access
A
B
C
(+1/8,-0)
24-1/2"
46"
20"
(Min,
34"
20"
28"
20"
All
22"
20"
Models)
Access Doors -
Cutout dimensions
Vent*
NOTE: The cutout of each corner should be 90
for the access doors to fit properly.
* Island installation to use minimum of 3 vents, 10 square
inches per vent (typical).
MODEL NUMBER
ADN 20x48
ADN 20x36
ADN 20x30
ADN 20x24
11
Vent*
A
B
90º
Cutout for Access Doors
FIG. 07
º
angle in order
A
B
(+0,-1/8) (+1/8,-0)
46"
20"
34"
20"
28"
20"
22"
20"
Vent*
Publicité
Chapitres
Table des Matières
Dépannage
