Saving Settings - Hama WLAN Router 300 Notice D'utilisation

Configuration and operation
DHCP server
DHCP client start IP
DHCP client end IP
Domain name
Static DHCP lease table
Here you have the possibility of assigning a fixed IP address from the
valid range to a given MAC address. If the client then logs in to the
device, he is always assigned this IP address.
Proceed as follows:
‹ Activate "Static DHCP leases"
‹ In the table, enter the "MAC address" and the "IP address".
‹ Click the button "Add" to save the input to the table or "Clear" to
clear the input.

Saving settings

‹ Confirm your inputs with "Apply".
‹ In the next window, click "Apply". The device now takes approx.
30 seconds to restart so that the settings are activated.
NOTE
►
WLAN Router 300
Input field Comments
Enter here for how long the assigned IP ad-
Lease time
dress is valid for the client.
Enter here the start of the IP address range
from which the DHCP server may assign IP
addresses to the clients.
Enter here the end of the IP address range
from which the DHCP server may assign IP
addresses to the clients.
Enter the domain name here.
After the restart, the new LAN configuration is immediately
valid. You have to use the new IP address to call up the
web interface in the browser.
g
67