Lan Settings - Hama WLAN Router 300 Notice D'utilisation

g

LAN settings

The settings for the cable-bound LAN are made here. To change the
standard LAN settings, proceed as follows:
‹ On the home page, click the button "General Setup" and then
select "LAN" in the menu on the left.
LAN IP
Subnet mask
DHCP server
66
Configuration and operation
Input field Comments
The default IP address of the device is
IP address 192.168.2.1. If you wish to use a different
address, enter another IP address here.
Enter the subnet mask here. Normally you
should enter 255.255.255.0 here.
Select "Activated" if the IP addresses in
your network are managed by a DHCP
server .
Select "Deactivated" if the IP addresses in
your network are assigned statically.
WLAN Router 300