Other; Cleaning And Maintenance - Renson Cube TouchDisplay Manuel D'instruction Pour L'utilisateur

10.2 • Other
The following error code appears if the connection with the ventilator unit is terminated:
11 • Cleaning and maintenance
The TouchDisplay does not require any specific maintenance.
It is sufficient to clean the display with a microfiber cloth. Pay attention not to scratch the
surface!
Make sure that the openings at both top and bottom are not exposed to water.
Never clean the TouchDisplay with detergent or substances containing solvents.
They could damage the display.
EN
138
Press any key to remove the error code and to access the main control
menu. Please contact your installer if the same problem keeps on
occurring.