Stand-Alone Connections; Connecting To A Monitor - FujiFilm SX800 Manuel De Base

Stand-Alone Connections

When the camera is connected to a monitor via an HD-SDI, VIDEO, or HDMI cable, you can view the live feed, control the camera,
and adjust camera settings via the control panel on the back of the camera.

Connecting to a Monitor

Connecting to a Monitor
SX800
1
Connect the supplied plug to the power cable and plug the cable into the
camera power connector.
4
Use only DC 12 V power.
CAUTION
b
Customers must supply their own power cable.
TIP
2
Connect the camera to the monitor using the appropriate cable.
The camera cannot be connected via HDMI while connect-
4
CAUTION
ed via HD-SDI.
3
Select stand-alone mode by setting DIP switches A and B to "ON" and DIP
switches C and D to "OFF".
4
Turn the camera on.
HD-SDI connection
VIDEO connection
HDMI connection
EN-11
Installation and Connection
Monitor
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
HD-SDI connection
VIDEO connection
HDMI connection
1 2 3 4 5 6 7 8