Technical Features; Packaging Content - ATI B 020 X Série Manuel D'utilisation

UK – pag. 1/4
BB020...X range water heaters are available in 6 different models in order to satisfy any installation and usage need
a) storage capacity : 20 litres (5.3 gal)
b) 3 power (500 w – 800 w - 1200 W)
c) 2 electric supply (120 v – 230 v) to.
1. GENERAL PRECAUTION MEASURES
The following instructions are important to grant safe installation, use and maintenance of the appliance.
• This booklet is integral and essential part of the water heater: therefore it has to be kept handy for any further
consultation.
• The water heater has been manufactured for hot water production: any other use of it has to be considered dangerous
and unsuitable.
• The appliance is not to be installed in damp rooms, bathtubs, washbasins, showers, pools etc. and it has to be
protected from water splashes, water spouts or other liquids in order to avoid short circuiting the electrical devices.
• Installation has to be done by a qualified person, who is responsible for the application of safety regulations in force.
Improper installation, caused by the non-compliance with the instructions provided by the manufacturer, could cause
injury to people, animal or damages to other equipments for which the manufacturer accepts no responsibility.
• Before plugging in the water heater, make sure that the electrical features printed on the data badge correspond to those
of the electrical supply.
• If the water heater is installed in a bathroom, in a damp room or close to water, take care of the safety distances as per
CEI-CEE regulations. Furthermore, switches or any other electrical control shall not be reachable by anyone having a
shower or using the bath. Do not touch the appliance with wet or damp hands.
• Do not allow any usage by children or incapacitated people without any supervision.
• Packaging parts (plastic bags, polystyrene, clips, etc.) have to be kept away from children, because they can be
dangerous.
• Read carefully this booklet because it provides useful instructions concerning safety, installation, use and maintenance.
• If the appliance is sold or moved to another owner, make sure that this booklet stays with the appliance, so the new owner
and/or installer can consult it.
• To avoid the risk of damage due to frost, if the appliance is not used for a long period and it is installed in a non-heated
room, we advise to empty it completely. The manufacturer is not responsible for any damage or breakage due to frost or to
water leakage from the plant.
• To get the best performance from the water heater and for warranty purposes, comply strictly with the instructions given
here below.

2. TECHNICAL FEATURES

electric supply V~
A
Power w
Capacity lt
gal
Max pressure kPa
psi
Empty weight kg
lb
Size mm
inch"

3. PACKAGING CONTENT

The water heater is packaged and delivered in a cardboard box with appropriate protection. Apart from the unit, inside the
box there are

installation manual

fixing brackets and fixing nuts kit.

pressure relief and non-return valve
4. DIMENSIONS (see fig. FIG_4-1)
5. CONSTRUCTION AND OPERATION DESCRIPTION
The purpose of this appliance is to heat domestic hot water in two different ways (see fig. FIG_5-1):
10_testo_UK.docx
BB02005X BB02008X
230
2,2 3,5
500 800
A
mm 420
inch " 16,4
BB02012X BB020051X
5,2
1.200
20
5,3
700
102
10
22
485x420x190
19,1x16,5x7,5
B C D E
457 488 190 420
17,8 19,0 7,4 16,4
BB020081X
120
4,2 6,7
500 800
F
485
18,9
210-0301_libretto_BB_20_inox_2014-
BB020121X
10,0
1.200