Publicité
Les langues disponibles
Les langues disponibles
Channel 5 :
The channel 5 has 2 functions :
-
Up-down zoom : You can adjust the proportion of the logo (adjustment of 1 to -1). It means that the logo is going to flatten horizontally
until the logo is a line (adjustment 0) and can re-establish the logo but reversed horizontally (adjustment -1). The adjustment depends
on the position of the potentiometer
-
Up-Down roll : You can launch a sequence that will modify the proportion progressively of the logo. This sequence can make a
rotation according to the horizontal axis of the logo. The speed of rotation depends on the position of the potentiometer.
Channel 6 :
The channel 6 has 2 functions:
-
Left-right zoom : You can adjust the X proportion of the logo (adjustment of 1 to -1). It means that the logo is going to flatten vertically
until the motive is a line (adjustment 0) and can re-establish the logo but reversed vertically (adjustment -1). The adjustment depends
on the position of the potentiometer
-
Left-right roll : You can launch a sequence that will modify the X proportion of the motive progressively. This sequence can make a
rotation according to the vertical axis of the logo. The speed of rotation depends on the position of the potentiometer.
Channel 7 :
The channel 7 has 2 functions:
-
Gobo size : You can adjust the size of the gobo. The size depends on the position of the potentiometer.
-
Right-left move : You can make a left - right transfer of the logo. The speed of transfer depends on the position of the potentiometer.
Channel 8 :
The channel 8 has 2 functions:
-
Slow draw : the HERMES 2 simulates the human writing (the logo is displayed progressively). The position of the potentiometer
determines the percentage of the logo displayed. It means if the potentiometer is to the minimum , The logo is displayed to 100%.
While increasing the value of the potentiometer, you decrease the percentage of display of the logo ( the logo fades away). If you
continue has increase the potentiometer whereas the motive is erased, the HERMES 2 begin to re-display the logo progressively.
-
Automatic human writing (speed drax): you can launch an automatic sequence simulating the writing human of the logo. The speed of
writing depends on the position of the potentiometer.
Channel 9 :
The channel 9 permits to adjust the position of the logo on the horizontal axis. According to the position of the logo, the HERMES 2 can
separate the logo in two parts. The position of the logo on the horizontal axis depends on the position of the potentiometer.
Channel 10 :
The channel 10 permits to adjust the position of the logo on the vetical axis. According to the position of the logo, the HERMES 2 can separate
the logo in two parts. The position of the logo on the vertical axis depends on the position of the potentiometer.
SPECIFICATIONS :
Power supply :
220V~240 / 50Hz-60Hz
Dimensions :
400 x 270 x 270mm
Weight :
7Kg
Laser :
Green and red
Laser power :
250mW ( 150mW/650nm + 250mW/532nm )
Consumption :
60W
WARRANTY CONDITIONS
LYT-OR equipment is covered by a 1-year warranty on parts and labour.
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by LYT-OR are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
LYT-OR will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
Publicité
