La Natura Lifestyle LZP5016 Smart Manuel D'utilisation page 27

EN
3. Cleaning the circuit
Before using for the first time or after long pauses (e. g. holidays) the
LZP5016 machine must be flushed out. This short procedure cleans the
internal piping thoroughly. Before starting to rinse, make sure that:
there is no capsule in the machine and the handle (A) is closed.
Fill the watertank "G"
with fresh water to the
maximum level.
Open the lever "A" and insert the enclo-
sed empty cleaning capsule. Close the
lever "A" and press the button "B". The
pump starts, after the heating system will
get the right temperature.
Plug the appliance.
Depending on how key B was programmed
by you, the rinsing process stops after
a certain time. The manufacturer
recommends a flush time of 50 seconds. If
necessary, press the button several times if
the flushing time is significantly underrun.
Remove the empty cleaning capsule from
the appliance and keep it for later rinsing.
26
STARTING UP
A large bowl (250 ml size
or more) is placed under
the dispenser / spout "H".