Dsp Parameter; Memory Guard - Yamaha RX-V465 Mode D'emploi

■ MaxVol
Adjustable range: -30.0dB to +15.0dB/+16.5dB* (5.0 dB
step)
Sets the maximum volume level so that the volume will
not be accidentally increased. For example, you can adjust
the volume between –80.0 dB and –5.0 dB when you set
this parameter to "–5.0dB." The volume increases to the
maximum level when this parameter is set to +16.5 dB
(default).
■ IniVol
Off*/Mute/-80.0dB to +16.5dB (0.5 dB step)
Choices:
Sets the volume at the time this unit is turned on. When
this parameter is set to "Off," the volume is set to a level
that last time this unit is set to standby.
Note
• If the setting of "MaxVol" is lower than the setting of "IniVol," the
setting of "MaxVol" becomes effective. For example, when you set
"MaxVol" to "–30.0dB" and "IniVol" to "0.0dB," the volume is
automatically set to "–30.0dB" at the next time this unit is turned on.
4 Input Rename
Changes input source names to be displayed on the front
panel display.
You can select an input source that you want to change the
name to be displayed using nCursor.
Selecting a name to be displayed from templates
Select an input source that you want to change the name,
and select a name from the following templates using
Cursor.
– Blu-ray – Satellite
– DVD – VCR
– SetTopBox – Tape
– Game – MD
– TV – PC
– DVR – iPod
– CD – HD DVD
– CD-R – "blank"
y
• If you change the display name of an input source to your original one
and select the input source, the current input source name and the
template name are displayed. This is convenient if you want to cancel
name change operation.
Entering an original name
Select an input source that you want to name, and press
nENTER. You can enter up to 9 characters by selecting
one character at a time with the following keys according
to the following operation.
nCursor l / h
For selecting characters that you
want to change
nCursor k / n
For selecting characters to be
entered
nENTER
For entering the selected characters
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
Operating various settings for this unit (Setup menu)

DSP Parameter

You can set parameters for the sound field programs. For
details, see page 38.

Memory Guard

Off*/On
Choices:
Protects settings of setup menu against accidental
alteration.
Off
Not protect settings.
On
Protects the settings of the setup menu
(except for the Memory Guard setting).
45
En