Jacobsen HR 4600 Turbo Manuel De L'opérateur Et De Sécurité page 12

3 CONTROLS
Z
M
T. Engine Throttle
Controls engine speed. Run machine at full throttle
during normal machine operation.
U. Cruise Control (Option)
When switched ON the cruise control will lock the
traction pedal in its current position. Cruise will unlock
when switched OFF, or if parking brake is applied.
V. Ignition Switch
The ignition switch has three positions. OFF-RUN (ON)-
START. In the RUN (ON) position the controller program
is running and input and output circuits are being
monitored. See Section 4.4 and Parts and Maintenance
manual.
W. Hour Meter
Records engine operating hours. Use hour meter to
schedule periodic maintenance.
X. Fuel Gauge
Indicates current fuel level. Check fuel gauge daily
before starting machine.
Y. Warning Lights
Alerts the operator to conditions requiring immediate
action. See Section 3.4.
Z. Temperature Gauge
Indicates engine coolant temperature. Normal operating
temperature should be between 160° - 230°F (71°-
110°C). If temperature rises above 230° (110°F), alarm
will sound. See Section 3.4.
GB-10
Y
O
P
X
W
Q
1
Q N R
V
T
U
S
LF003
Figure 3C