Axent ONE Manuel Utilisateur page 22

USE WITH REMOTE CONTROL
S E LF- C LE AN I N G FU N CTI O N
As soon as you sit down on the shower toilet, the spray arm is cleaned with fresh water.
This function can be activated or deactivated.
Press and hold [ 19 ] Setting and [ 22 ] Energy-saving mode in order to activate or deactivate the automatic self-cleaning function.
Single short «beep» and LED [ 22 ] Energy-saving mode lights up.
Single long «beep» and LED [22] Energy-saving mode goes out.
Factory setting:
S PR AY AR M C LE AN I N G
Press [ 18 ] Spray arm cleaning. The spray arm extends without a water jet.
Clean the spray arm with a soft cloth, sponge or brush.
Press [ 18 ] Spray arm cleaning or [ 7 ] Stop. The spray arm will move back to its starting position.
If neither are pressed within 3 minutes, the spray arm will move back automatically
20
2 3
8 9
17
18
19
Automatic self-cleaning function is activated.
Automatic self-cleaning function is deactivated.
Automatic self-cleaning function is activated.
4 5 6
10 11 12 13 14 15
7
16
20
21
22