Plus Only - Axent ONE Manuel Utilisateur

USE WITH REMOTE CONTROL
The remote control is part of the product content of AXENT.ONE
R E M OTE CO NTRO L O N/O FF/C HARG I N G
ON The remote control is powered off initially. Press [ 19 ] Set for 2 sec. to turn on the remote control.
OFF Press [ 19 ] Set and at the same time [ 1 ] User for 2 sec. to turn off the remote control.
Charging When the power is less than 15%, the [ 4 ] AXENT Logo blinks on and off, which means the battery needs to be charged.
Please connect the standard charge cable to the Charge port [ 23 ] on the remote control.
The [ 5 ] Indicator Lights indicates the battery power and all 5 lights are on when remote control is fully charged.
Don't charge remote control in moist condition.
The rechargeable Li-ion battery is built into the remote control and can't be disassembled by users. Please contact the
local dealer or call the service hot line if there is any problem.
Please charge the remote control for at least 12 hours before first use. It should be noted that the remote control is NOT on a magnet-
friendly surface. A surface with ferromagnetic properties, e.g. Iron is also to be avoided as it affects the charging of the battery.
STAN D - BY M O D E R E M OTE CO NTRO L
The remote control enters into the standby mode automatically and all indicator lights turn off when there is no activity for some time.
Press any icon to exit the standby mode.
16
2 3
8 9
17
18
19
only.
Plus
1
4 5 6
10 11 12 13 14 15
23
7
16
20
21
22