Axent ONE Manuel Utilisateur page 13

ADDITIONAL FEATURES
LE VE L 1 SYSTE M PU RG E
After a long time of not using the shower toilet, all water bearing parts can be exchanged with
fresh water.
You are in the mode level 1: «Ambient light» flashes slowly.
– Turn multifunction knob clockwise.
You will hear one «beep«. The system purge has started.
The system purge process stops after 90s automatically.
Turn multifunction knob clockwise again to stop the system purge procedure
immediately.
LE VE L 1 E M PT YI N G TH E WATE R TAN K
In case of a service intervention, you might be obliged to empty the water tank.
You are in the mode level 1: «Ambient light» flashes slowly.
– Pull the multifunction knob.
– Turn it counterclockwise.
The pump empties the water tank. You will hear a «beep» if the process is finished.
LE VE L 1 AM B I E NT LI G HT
Factory setting:
You are in the mode level 1: The «Ambient light» flashes slowly.
– Pull the multifunction knob.
– Turn it clockwise.
Single «beep»
Two «beeps»
The ambient light is activated.
The ambient light is activated.
The ambient light is deactivated
11