WARNING!
Unplug or disconnect the appliance from the power supply before servicing
●
●
or cleaning.
When replacing the bulb, let the bulb cool, and assure that power to the ventilation
●
●
hood has been turned off. Use new bulbs according to that indicated on the
ventilation hood nameplate.
IMPORTANT!
Never use abrasive or oil based cleaners
●
●
Wear gloves to protect against sharp edges
●
●
Maintenance
The ventilation hood should be cleaned regularly
using a mild, liquid detergent and a clean soft cloth
to avoid a build-up of grease occurring. Avoid
the use of corrosive chemicals, abrasive cleaning
products, hard brushes and steel wool pads. Grease
deposits are corrosive which can cause damage to
your ventilation hood.
Note: in areas of high humidity or coastal
environments, cleaning should be carried out more
frequently.
Aluminium filters
Depending on use, and at least once a month, the aluminium grease filters should be
●
●
removed and cleaned with hot soapy water or in a dishwasher.
If washed in a dishwasher, the filters should be placed in an upright position to prevent
●
●
food from falling on them.
After rinsing and drying, replace the filters.
●
●
Note: some discoloration of the frames may occur.
Removing the aluminium filters:
Open the stainless steel panel.
1
Pull the relative filter catch, tilting it downwards until it disengages from the supports.
2
Reverse these instructions when refitting the filters.
3
CLEANING AND MAINTENANCE
EN
16