SHIPPING INSPECTION
1. Inspect the Access Drawers to verify that there is no
shipping damage.
2. If any damage is detected, call the shipper and
initiate a damage claim. DCS by Fisher & Paykel is not
responsible for shipping damage.
NOTE: Do not discard any packing material (box, pallet,
straps) until the unit has been inspected.
■ Operate the drawers to be sure they glide smoothly.
■ Examine the drawer fronts to be sure there are no dents or
scratches or discoloring.
CABINET PREPARATION
■ Cabinet face should be clean and flat.
■ All angles must be at 90 º and plumb.
■ Support structure must be resistant to moisture damage.
■ All gas lines and plumbing must be done before installing access drawers.
■ Do not use any harsh products (acid, solvent, sealers) around this unit.
■ Any cabinet and/or ground preparations must be completed prior to installation.
5
Fig. 2