Malfunctions; Fault Indication Of The Steam Bath Control - Nordmann Engineering AT4D Instructions D'installation Et D'exploitation

6

Malfunctions

6.1

Fault indication of the steam bath control

Warning messages
With the exception of the warning message "Maintenance due" no other warn-
ing messages are shown in the operating display of the steam bath control.
42°C
Standby
45min
Error messages
Malfunctions making further operation impossible, are indicated by the
warning symbol in the top right corner of the display and the error number.
With the error message 14 additionally the symbol
messages 28 and 29 the symbol
Error
Error 23
Error
Error 28
Error
Error 14
Modbus
Error 35
Reg.(R):40026
Note: Detailed information regarding malfunctions can be found in the mal-
functions list in the operating instructions of the Nordmann AT4 D.
Warning message "Maintenance due"
(the symbol is shown in the operating
display)
is shown in the operating display.
Error message (generic, e.g. Error 23 "no
electrode current")
Error message 28 "Maintenance not carried out"
(additionally the symbol
operating display)
Error message 14 "steam cabin door open"
(additionally the symbol
operating display)
Error message (Error 35 "Modbus Timeout")
and with the error
is shown in the
is shown in the
47