Setting The Bathing Time; Setting The Time Of Day - Nordmann Engineering AT4D Instructions D'installation Et D'exploitation

5.6

Setting the bathing time

5.7

Setting the time of day

44
Note: the bathing time is automatically adjusted between the control of the
Nordmann AT4 D and the steam bath control.
42°C
Standby
45min
Note: the time of day is automatically adjusted between the control of the
Nordmann AT4 D and the steam bath control. If the time of day is not set
correctly you can change the time via the steam bath control as follows:
42°C
Standby
45min
08:19
15:00 :
45min
09:25 :
09:25
15:00 :
45min
In the operating display (standby or steam bath
operation) set the desired bathing time
using the and
5...240 minutes).
In the standby operating display tap on the
key.
Within the time settings display tap on the
key.
Using the and
pair of keys) and the minutes (right pair of
keys) of the time of day. Then, tap on the
to save the setting.
Tap on the . The steam bath control return
to the standby operating display.
keys (setting range:
keys set the hour (left