Joerns Healthcare Oxford Journey Manuel De L'utilisateur Et Garantie page 16

Oxford ®
Journey
10. Removable footplate
The Oxford Journey has a removable footplate. To remove the footplate, move to the front of the
Oxford Journey and lift the footplate upward from the middle of the base assembly.
NOTE: Be careful when removing the footplate from its low-seated position as it is heavy. Always
use appropriate moving and handling techniques.
If using the Oxford Journey for gait training, the foot tray should be removed and a
thorough risk assessment carried out to ascertain suitability prior to lifting.
11. Adjustable cow horn
The Oxford Journey has an adjustable cow horn. This allows the carer to position the cow horn in
a comfortable position to suit the patient or environment. The cow horn has 3 positions. Position
1 is more suitable for a large/taller patient, position 2 is more suitable for a medium/average
size patient and position 3 is more suitable for a shorter/pediatric patient or when standing a
patient from a low chair. (Please note, these are guidelines only, it may be necessary to adjust
according to patient comfort). To adjust the cow horn, simply pull the trigger backwards towards
the rear of the lift whilst holding the cow horn. Then select the desired position as indicated by the
positioning decal and release trigger to lock. The cow horn has 3 alternative positions for lifting
and a further one for the storage/fold position.
Position 1
Cow Horn Lift Positions
16
294000.10050 Rev. C
WARNING
Position 2 Position 3
E n g l i s h
Position 1
Position 2
Position 3
Storage/Fold