Fisher & Paykel HC24PHTX1 Guide D'utilisation page 19

Attach the ducting
6
Attach ducting to the ducting adapter using aluminum duct tape and vent outside.
● ●
Attach chimney
7
Bend the tabs on the chimney (A).
● ●
Place chimney around the ventilation hood chassis and hang off the
● ●
chimney bracket (B).
Extend the upper chimney and attach to the upper chimney bracket
● ●
with 13/ 3 2" (10 mm) screws (C).
A
Remove packaging
8
Remove all packaging and protective wrappings.
● ●
INSTALLATION INSTRUCTIONS
B
EN
C
17