Table des Matières
Publicité
To external decoder or amplifier
You have the possibility to transmit the digital audio signal to a decoder or amplifier. Therefore use
the Stereo RCA output.
1.
Switch off and unplug all devices
2.
Connect the receiver and the TV with a SCART or HDMI cable
3.
Connect the HRT 7510 to the decoder or amplifier (RCA cable)
4.
Switch on all devices
5.
Activate the Stereo input at your decoder or amplifier
Note:
•
The Cables are not part of the accessories
•
You can gain information about the audio signal by pressing the AUDIO key on your
remote control
Connection
HRT 7510
13
Publicité
Chapitres
Table des Matières
Dépannage
