Sony HANDYCAM HDR-GW77 Mode D'emploi page 49

Connection
TV Type ............................. Converts the signal depending on the TV connected (p. 36).
HDMI Resolution ........... Selects the output image resolution when connecting your camcorder to a
CTRL FOR HDMI ............. Sets whether or not the TV's Remote Commander is to be used when
USB Connect ................... Select this item when no instructions appear on the LCD screen when you
USB Connect Setting ... Sets the connection mode when the camcorder is connected to a computer
USB Power Supply ........ Supplies power to the camcorder using a USB cable.
USB LUN Setting ............ Sets the camcorder to improve the compatibility of a USB connection by
Disc Burn .......................... Saves images that have not yet been saved onto a disc.
General Settings
Beep ................................... Sets whether the camcorder sounds operation beeps or not.
LCD Brightness .............. Adjusts the brightness of the LCD screen.
Your Location*
1
Airplane Mode*
GPS Setting* .................. Receives the GPS signal (p. 36).
1
Language Setting ......... Sets the display language (p. 23).
Power Save ...................... Sets the LCD screen and the power so that they turn off automatically.
Initialize ............................ Initializes all the settings to the default settings.
Demo Mode .................... Sets playback of the demonstration movie about the functions of the
Clock Settings
Date & Time Setting ..... Sets the date and time (p. 22).
Area Setting .................... Adjusts for a time difference without stopping the clock (p. 22).
Auto Clock ADJ *
Auto Area ADJ*
* HDR-GW77V
1
TV with an HDMI cable.
the camcorder is connected to a "BRAVIA" Sync compatible TV with the
HDMI cable.
connect your camcorder to an external device via USB.
or a USB device.
restricting some USB functions.
.............. Displays the current location on a map.
............ Settings to be used when you are on board an airplane.
1
camcorder.
.......... Adjusts the clock automatically by acquiring the time from the GPS
1
system.
............. Corrects time differences automatically by acquiring the current location
1
information from the GPS system.
US