Table des Matières
Publicité
Network Bridge Communication
Network Bridge Communication
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by wired or wireles LAN
communication, an external device connected with this projector by RS-232C
communication can be controlled from the computer as a network terminal.
For details, see the 7. Network Bridge function in the Network Guide.
NOTE • If data is transferred using wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
If you use wired LAN, connect the computer's LAN port and the projector's
1.
LAN port with a LAN cable. Use the cable that fulfi lls the specifi cation shown
in fi gure. If you use wireless LAN, insert the USB wireless adapter into the
projector's LAN port.
Connect the projector's CONTROL port and the RS-232C port of the devices
2.
that you want to control with a RS-232C cable.
Turn the computer on, and after the computer has started up turn the
3.
projector on.
Set the COMMUNICATION TYPE to NETWORK BRIDGE in the
4.
COMMUNICATION menu of the OPTION - SERVICE menu.
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Technical
WIRELESS port
LAN
LAN or
HDBaseT port
LAN cable
(CAT-5 or greater)
20
USB wireless adapter
RS-232C cable
(cross)
RS-232C
LIT MAN USR D2 TECH GUIDE
020-000789-01
Publicité
Table des Matières
