HANDLING PRECAUTIONS
The followings are special precautions against mishandling of the product, which may cause
serious damages to the product. Pay close attention to them.
①Installation
Do not place the MX-1
on an unstable place or
slanted surface.
③Setting up
When setting up the MX-1,
hold the body around the
Operating panel.
Be careful not to pinch
your fingers.
⑤Stage
There is a magnet inside the bottom of the MX-1.
By removing 2 screws in the bottom, you can move the
position of the MX-1 within the stage.
Do not attach the MX-1 to a metal object such as a
steel cabinet. The stage may fall and get broken.
②Magnet in the bottom
A magnet is in the bottom of the MX-1. Keep
the bottom of the MX-1 away from devices
and objects that could be damaged by
strong magnetic fields (such as a computer,
monitor, and magnetic card).
④Carrying the MX-1
Carry the MX-1 by folding the arm so as not
to damage the camera. Do not carry by
holding the arm or camera head.
29
日
本
語