Télécharger Imprimer la page

Televes 512501 Guide Rapide page 3

Récepteur tdt hd en diversité

Publicité

< -5 ºC
Alimentación: Tensión continua
12-24V / 800-400 mA máx.
> 45 ºC
Líquidos: No exponer el receptor a
la caída o salpicaduras de agua.
No situar objetos o recipientes que
contengan líquido sobre o en las
proximidades del aparato.
Pequeños objetos: Evitar la proxi-
midad de pequeños objetos metá-
licos. Éstos podrían entrar por las
ranuras o conectores del receptor y
> 80 %
causar graves daños.
Limpieza: Desenchufar el receptor
de la alimentación antes de efec-
tuar la limpieza.
Utilizar un paño suave, ligeramente
humedecido en agua (sin deter-
gentes) para limpiar el exterior del
receptor.
Ventilación: Colocar el receptor
en un lugar bien ventilado con las
ranuras al descubierto. Evitar la ex-
posición al sol, a fuentes de calor o
a llamas.
No colocar encima otros equipos.
Conexiones:
las conexiones recomendadas para
evitar posibles daños.
Conexión al TV: Desenchufe el re-
ceptor antes de conectarlo o desco-
nectarlo a un TV.
No actuando así, podría dañar el TV.
Ubicación: Colocar el receptor en
un local interior protegido de gol-
pes, lluvia o sol directo.
ES
Atención: asegúrese de conectar
correctamente el cable rojo al
terminal positivo y el cable negro
al terminal negativo. Asimismo la
fuente de alimentación ha de ser
capaz de entregar la corriente ne-
cesaria.
Efectúe solamente
EN
Powering: DC voltage 12-24V /
800-400 mA max.
Attention: be sure to correctly
connect the red wire to the
positive terminal and the black
wire to the negative terminal.
The power supply should also be
capable of delivering the needed
current.
Liquids: The equipment must not
come into contact with water or
even be splashed by liquids. Do
not place containers with water on
or near the equipment if it is not
adequately protected.
Small objects: Avoid proximity of
small metallic objects. They may
enter the slots or connectors on the
receiver and cause serious damage.
Cleaning: Do not attempt to clean
the receiver without first unplugging
it.
Do not use liquid, abrasive, solvent
or aerosol cleaners to clean the
receiver, it may be damaged. Just
make use of a soft cloth slightly
moistened with water.
Ventilation: Place the receiver
in a well ventilated area without
blocking the vents.
Avoid exposure to sunlight, heat or
flame.
Do not place other equipment on
the receiver.
Connections: Make connections
only
recommended
to
possible damage.
TV
connection:
Unplug
receiver
before
connecting
disconnecting the TV set.
COULD OTHERWISE DAMAGE THE
TV SET.
Location: Place the receiver in a
room inside, protected from shock,
rain or direct sunlight.
3
avoid
the
or

Publicité

loading