Scheduled Maintenance Table - Nilfisk Advance Proterra Instructions D'utilisation

SCHEDULED MAINTENANCE TABLE

NOTE
Maintenance intervals given are for average operating conditions. Machines used in severe operational environments
may require service more often.
Procedure
Battery fl uid level check
Hydraulic oil level check
Parking brake check
Main and side broom cleaning
DustGuard system water fi lter check and
cleaning (optional)
Hydraulic system oil cooler cleaning
Broom check and adjustment
Hopper dust fi lter check and cleaning ("A"
method)
Skirt integrity, height and operation check
Hopper gasket integrity check
Check and cleaning of electric fan and main
motor carbon brush housing.
Steering wheel bearing and hydraulic piston
lubrication
Tank hydraulic oil fi lter replacement
Pump hydraulic oil fi lter replacement
Hopper dust fi lter check and cleaning ("B"
method)
Hopper dust fi lter check and cleaning ("C"
method)
Hydraulic oil "recharge" fi lter replacement
Tank hydraulic oil change
(1) For the relevant procedure, see the Service Manual.
(2) Or more often in dusty areas.
(3) Change the hydraulic oil for the fi rst time after 500 hours, then every year.
Upon delivery Daily
Proterra™
INSTRUCTION FOR USE
After the
Every 30
fi rst 50
hours
hours
(2)
(1) - (2)
33019867(2)2010-09
ENGLISH
Every Every Every
150 300 1,000
hours hours hours
(1)
(1)
(1)
(2)
(2)
(1)
(1) - (3)
19