Acer Leap Ware Manuel D'utilisation page 32

32 - Troubleshooting
My Leap Ware won't pair
Please make sure your smartphone's Bluetooth is enabled from your
smartphone's Bluetooth settings. If you have just enabled Bluetooth,
remove Acer Liquid Life from recent apps and launch it again.
If Acer Liquid Life says it cannot find your Leap Ware, please go to
your smartphone's Bluetooth settings and look at the connected
devices. You should see a device name starting with LeapWare. If it
says connected, tap and hold the device name (or in iOS tap the (i)
icon) and select Forget this device or delete. Return to Acer Liquid
Life and connect again.
How do I remove the Leap Ware from my account?
Open Acer Liquid Life, open Settings and tap Device. You will see an
Unpair button; tap to unpair your Leap Ware.
To pair a new device,
on page
How do I update my Leap Ware?
From time to time, there may be updates available for your Leap
Ware. When you pair your Leap Ware with a phone, it will check for
and apply updates.
If an update is available, you will receive an update notification and
your Leap Ware will automatically update when it syncs with the app.
Ensure your smartphone and Leap Ware are sufficiently charged.
The UV rating is not accurate
Do not block the meter (above the touchscreen) while it is active. The
meter must be in direct sunlight and point towards the sun.
see Pairing the Leap Ware with your phone
8.