Sony WEGA KLV-23HR2 Mode D'emploi page 42

AV2 Output
• If you select Auto, the output signal will always be the same one that is displayed on
the screen.
• If you have connected a decoder to the Scart connector
connected to this Scart, please remember to set AV2 Output to Auto for correct
unscrambling.
• Even if AV2 Output is set to Auto, signals input through a "Memory Stick" are not
output from Scart connector
Menu Colour
40
Menu System
The "AV2 Output" option allows you to select the source to be output
from the Scart connector
signal coming from the TV or from external equipment connected to the
other connectors.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
1
After selecting this option, press
2
Press or to select the desired output signal: Auto, TV, AV1,
or AV3.
2/
The "Menu Colour" option allows you to alter the background colour of
the menus.
To do this:
1
After selecting this option, press
2 Press or to select White or Black.
2/ 2. You can record from this Scart any
S
.
2/
2.
S
.
2 or to a VCR
S