Sony WEGA KLV-23HR2 Mode D'emploi page 29

Bundling the cables
You can store the cables in the back of the TV.
1
Bundle the cables and secure them with the
clips on both sides of the TV.
2
Pass the cables through the grooves. Be sure to
place the cables inside the tabs at the bottom of
the TV.
3
Put the cables from both sides together and
secure them with the clip at the bottom.
• It may not be possible to fasten cables that
are too thick with the clips.
• If all the cables cannot be stored inside,
leave some of them hanging down on both
sides of the TV.
If the cables are not neatly stored in the
grooves, you may not be able to attach the
rear cover.
Clips
GB
Tabs
Clip
(continued)
27
Installation