Auto-Lift Device - LG SIGNATURE URETC1408N Manuel Du Propriétaire

26 OPERATION

Auto-lift Device

Removing the Auto-lift Device
Remove the auto-lift device in the bottom drawer
to increase the storage space or for cleaning.
1
Unplug the refrigerator or disconnect power.
2
Open the bottom drawer, hold the inner
compartment with both hands and pull it out.
3
The auto-lift device is at the bottom of the
drawer. Hold the inner edge of the device with
both hands and pull it up.
4
Hold the top of the auto-lift device with both
hands and remove it from the bottom drawer.
WARNING
• The auto-lift device is heavy, so remove it
with both hands.
5
Insert the fingertips of both hands under the
cover at the center and pull the cover forward
gently.
CAUTION
• Pull the cover gently to avoid damaging it.
6
Fold the back of the cover down and push the
folded cover back slightly.
7
Insert the supplied hole cover into the groove
at the bottom of the drawer.