Leveling; Turning On The Power - LG SIGNATURE URETC1408N Manuel Du Propriétaire

14 INSTALLATION

Leveling

The refrigerator has two front leveling legs. Adjust
the legs to alter the tilt from front-to back or side-to
side. If the refrigerator seems unsteady, or the
door does not close easily, adjust the refrigerator's
tilt using the instructions below:
1
Open the bottom drawer and remove the cover
from the appliance.
2
Turn the leveling leg to the left to raise that
side of the refrigerator or to the right to lower
it. It may take several turns of the leveling leg
to adjust the tilt of the refrigerator.
3
Open the door and the drawers and check to
make sure that they close easily. If they do
not close easily, tilt the refrigerator slightly
more to the rear by turning both leveling legs
to the left. It may take several more turns, and
be sure to turn both leveling legs the same
amount.
4
When the refrigerator is level, open the bottom
drawer and reassemble the cover.

Turning on the Power

• After installing, plug the refrigerator's power cord
into a 3-prong grounded outlet and push the
refrigerator into the final position.
CAUTION
• Connect to a rated power outlet.
• Have a certified electrician check the wall
outlet and wiring for proper grounding.
• Do not damage or cut off the ground terminal
of the power plug.
Position the Refrigerator
• Arrange the refrigerator so that it does not
vibrate against adjoining surfaces or against the
wall. Be sure to maintain at least a 2" clearance
behind the refrigerator for proper ventilation.