Viewing The Connections - Tucson TL5005SMART Mode D'emploi

Viewing the Connections

NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection cables to
enable connection. See the illustrations above. To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION
cable's WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to
AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via
the scart socket. | When using the wall mounting kit (optional), we recommend that you plug all your cables into the back
of the TV before mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should
refer to the module instruction manual for details of the settings. Insert the CAM and then the viewing card to the slot that is
located in the terminal cover at the rear side of the TV. The module should be correctly inserted, it is impossible to insert fully
if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
English - 41 -